ivideon Bridge B1610 - Configuring Ivideon Bridge for Work

8 9
Bridge B1610 Bridge B1610
7
Avoid installing the device close to a
functioning air conditioning unit to reduce
the likelihood of condensation on the
Ivideon Bridge body.
8
Do not install the product in areas with a
temperature above 40°C, and make sure
there is proper ventilation.
Configuring Ivideon Bridge for work
See the figures on and after page 11 of the
instructions. The figure numbers correspond to
the points in the instructions.
1
Sign in to your account on ivideon.com.
If you do not yet have an Ivideon
account, register on the website by clicking
Create an account;
2
In the Cameras section, select Connect a
device;
3
Select Ivideon Bridge;
Enter a name for your bridge followed by the
device’s MAC address or serial number (both
should be listed on the underside of the
bridgeor on the packaging);
5
Connect the Ivideon Bridge to the internet. To
do so, connect the device to your interneten-
abled router with an ethernet cable;
6
Connect the Ivideon Bridge to a power
supply;
7
Click Continue to connect the Ivideon Bridge
to your account (this process can take a few
minutes);
8
Once the Ivideon Bridge is connected, it will
be available for configuration in the Cameras
section.
4