ivideon Bridge B1610 - Adding Cameras to Ivideon Bridge

12 13
Bridge B1610 Bridge B1610
4
Adding cameras to Ivideon Bridge
9
In the Cameras section, select Your
Bridge from the list of connected devices,
and then click the gear icon (Configure
Bridge);
10
The bridge system will automatically scan
your LAN and list all devices available for
connection (cameras and DVRs). Select the
one you’d like to connect, after which the
camera/DVR settings menu will open on the
right side of the screen;
11
If your cameras or DVR weren’t discovered
automatically, you can add them manually
by clicking the + button in the Connected
devices section;
12
Enter the username and password for the
camera or DVR you want to connect. If you
don’t know what they are, you can contact
the hardware manufacturer, call your
system administrator, or check the included
instructions or documentation;
13
After entering the correct information, you’ll
see an image preview from the camera and
be able to change its name;
14
Once you’re done connecting your
camera, click Connect camera, after which
it will be listed in the Cameras section
of the web application.