Need help?Do you have a question about the Ivoclar Vivadent Programat EP 3010 and is the answer not in the manual?
General| Manufacturer | Ivoclar Vivadent |
|---|---|
| Model | Programat EP 3010 |
| Type | Porcelain Furnace |
| Application | Firing of dental ceramics |
| Cooling Rate | Adjustable |
| Programs | Multiple programmable firing programs |
| Control | Touchscreen interface |
| Power Supply | 220-240V, 50/60Hz |
| Weight | Approx. 20 kg |
Emphasizes that short instructions are supplementary and the full Operating Instructions must be read.
Instructions for removing screws, placing, and securing the cooling tray and placing the firing plate.
Steps for correctly mounting the furnace head onto the base, ensuring it snaps into place.
Connecting vacuum hose, thermocouple, press drive, heater plugs, and power cord securely.
Securing internal connections by closing the covering hood and mounting the connection cover.
Connecting the power cord and vacuum pump, with recommendations for specific Ivoclar Vivadent pumps.
Guide to navigating the device using the keypad and touchscreen for user-friendly operation.
Detailed description of each key's function: HOME, PROGRAM, MODE, POWER SAVING, OPEN/CLOSE HEAD, START, STOP.
Step-by-step guide for selecting program type, group, desired firing program, editing parameters, and starting.
Step-by-step guide for selecting program type, press program, investment ring size, and starting.
To Next Page
