Need help?Do you have a question about the Ivoclar Vivadent Programat CS4 and is the answer not in the manual?
General| Type | Ceramic furnace |
|---|---|
| Manufacturer | Ivoclar Vivadent |
| Model | Programat CS4 |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Program Memory | Multiple programs |
Brief introduction to the furnace and its intended use.
Explanation of symbols used in the operating instructions for clarity.
Important guidelines for using the operating instructions correctly.
Information on voltage compatibility and power supply requirements.
Clarification on the illustrative nature of images in the manual.
Specific applications and intended uses of the furnace.
Essential safety guidelines for operation and maintenance.
List and identification of the main parts of the furnace.
Identification of risks and safety features of the furnace.
Overview of the furnace's capabilities and operational principles.
List of optional or recommended accessory items.
Scope of use and limitations for the furnace.
Procedure for safely removing and verifying furnace components.
Guidance on choosing a suitable and safe placement for the furnace.
Steps for assembling the furnace and its initial setup.
Overview of the furnace's control interface and basic operation.
Detailed description of each button and its function on the control panel.
Understanding the information displayed on the furnace screen.
Procedure for powering on the furnace and initiating self-test.
Steps for correctly placing units on the sinter tray for processing.
Guide to executing a standard sintering process.
Instructions for cleaning internal furnace components.
List of error codes and their troubleshooting solutions.
List of items included in the furnace package.
Key technical specifications and parameters of the furnace.
Environmental requirements for optimal furnace performance.
Guidelines for safe transport and storage of the unit.
Reference to program tables for material processing.
To Next Page
