12
3. Product Description
3.1 Components
The Programat CS4 consists of the following components:
– Furnace base with electronic controls
– Furnace head with sintering chamber
– Sinter tray
– Crystallization tray
– Cooling tray
– Power cord
– Sinter tray fork
– Cleaning brush
3.2 Hazardous areas and safety equipment
Description of the hazardous areas of the furnace:
Hazardous area Type of risk
Sintering chamber Burn hazard
Opening and closing mechanism Risk of crushing
Electric components Risk of electric shock
Description of the safety equipment of the furnace:
Safety equipment Protective effect
Protective conductor Protection from electric shock
Electric fuses Protection from electric shock
Furnace housing and end caps Protection from electric shock,
burning and crushing
3.3 Description of functions
The sintering chamber may be heated up to max. 1600 °C/2912 °F
by means of a heating element. The process is controlled with the
corresponding electronic controls and software. Moreover, the set
and actual temperatures are continuously compared.
3.4 Accessories
– Sinter Furnace Temperature Checking Set UTH (880°C)
– Sinter Furnace Temperature Checking Set MTH (1500°C)
3.5 Indications/contraindications
Indications
– Sintering and glazing of ZrO
2
materials (e.g. IPS e.max ZirCAD)
– Crystallization and glazing (e.g. IPS e.max CAD)
Contraindications
– The Programat CS4 is not suitable as a ceramic furnace for dental
laboratories.
To Next Page
Loading...
