3
Views of the Furnace, List of Parts 4
1. Introduction / Signs and Symbols 8
1.1 Preface
1.2 Signs and symbols
1.3 Notes regarding these Operating Instructions
1.4 Notes regarding the different voltage versions
1.5 Notes on the images in the Operating Instructions
2. Safety First 9
2.1 Indications
2.2 Health and safety instructions
3. Product Description 12
3.1 Components
3.2 Hazardous areas and safety equipment
3.3 Descriptions of functions
3.4 Accessories
3.5 Indications/contraindications
4. Installation and Initial Start-Up 13
4.1 Unpacking and checking the contents
4.2 Selecting the location
4.3 Assembly
4.4 Removing the furnace head
4.5 Initial start-up
5. Operation and Configuration 18
5.1 Introduction to the operation
5.2 Explanation of the key functions
5.3 Basic meaning of the display readouts
5.4 Program structure
5.5 Settable parameters and possible value ranges
5.6 Settings / test programs and information
5.7 Explanation of the display symbols
5.8 Explanation of the acoustic signals
5.9 OSD
6. Practical Use 23
6.1 Switching on the furnace
6.2 Loading for sintering programs
6.3 Sintering procedure with a standard program
6.4 Loading for glaze and crystallization programs
6.5 Glazing and crystallizing procedure with a standard program
6.6 Individual programs
6.7 Additional possibilities and special features of the furnace
6.8 Programming
7. Maintenance, Cleaning and Diagnosis 26
7.1 Cleaning of the sintering chamber and the heating elements
7.2 Monitoring and maintenance
7.3 Cleaning
7.4 Test programs
7.5 Stand-by
7.6 Temperature calibration
7.7 Service hint
8. What if ... 30
8.1 Error messages
8.2 Technical malfunctions
8.3 Repair
9. Product Specifications 32
9.1 Delivery form
9.2 Technical data
9.3 Acceptable operating conditions
9.4 Acceptable transportation and storage conditions
10. Appendix 33
10.1 Program table
Table of Contents
To Next Page
Loading...
