GB-6
1
Press the MODE button to select the
operation mode.
2
Press the ON/OFF button to start op-
eration.
• The red OPERATION lamp ( ) will light up.
TO TURN OFF
Press the ON/OFF button again.
• The red OPERATION lamp ( ) will turn off.
3
Press the THERMOSTAT button to
set the desired temperature.
(AUTO/DRY mode)
The temperature can be
changed up to ±2 °C the
automatically set of tem-
perature.
(COOL/HEAT mode)
The temperature setting
range:18-32 °C.
4
Press the FAN button to set the
desired fan speed.
2
3
1
4
BASIC OPERATION
AUTO HEAT COOL DRY
NOTE:
AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to the
room temperature and outdoor temperature when the unit is turned on.
During operation, if the outdoor temperature changes, the temperature settings will automatically
change.
DRY MODE
The fan speed is preset to AUTO and cannot be changed.
AUTO SOFT LOW HIGH
To Next Page
Loading...
Need help?
General
