REV 7-16-20124
Specifications
Unit specifications: (8105, 9225, 9225-2, 9235, 9235LD)
Voltage: 120vac, 60hz
Amperage: (1) 20 amp service is required for this unit.
Weight: 110-135 lbs with pallet attached.
Vac specifications:
Motors: (2) 120vac vacuum motors.
Fuses: (2) 10 amp inline fuses.
______________________________________________________________________________________________
Unit specifications: (9225-3, 9235-3, 9235-3LD, 9235-3DH, 9235-3DH-WALL)
Voltage: 120vac, 60hz
Amperage: (1) 30 amp service is required for this unit.
Weight: 140 lbs with pallet attached.
Vac specifications:
(9225-3, 9235-3, 9235-3LD, 9235-3DH, 9235-3DH-WALL)
Motors: (3) 120vac vacuum motors.
Fuses: (3) 10 amp inline fuses.
______________________________________________________________________________________________
Unit specifications: (9225-220V, 9235-220V, *9235-3-220V, *9235-3DH-220V)
Voltage: 220v, 50hz
Amperage: (1) 15 amp service is required for 2 motor units, *(1) 20 amp service is required for 3 motor units.
Weight: 125-140 lbs with pallet attached.
Vac specifications:
Motors: (2) or (3) 220vac vacuum motors depending on model.
Fuses: (2) or (3) 8 amp inline fuses, depending on model.
Duty cycle time 4 minutes on, 4 minutes off.
NOTE: “UNIT INTENDED FOR COMMECIAL USE ONLY”
2 Motor 120V Vacuum Units
3 Motor 120V Vacuum Units
2 & 3 Motor 220V Vacuum Units
To Next Page
Loading...
