To Next PageTo Next Page
Need help?Do you have a question about the J-TECH VF563 Series and is the answer not in the manual?
General| Model | VF563 Series |
|---|---|
| Category | Measuring Instruments |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C - 50°C |
Explains vortex shedding and ultrasonic beam sensing for flow rate determination.
States the 12-month warranty and restriction on measuring explosive gas mixtures.
Covers proper pipe alignment, straight pipe requirements, and hose connections.
Advises on vertical installation for liquid drainage and use of filter canisters.
Details power supply needs, analog output signals, and cable specifications.
Identifies pins for power, ground, and signal outputs on the flowmeter connector.
Illustrates a typical system setup including optional components and connections.
Shows how to connect the flowmeter to power supply and customer instrumentation.
Details jumper settings for selecting analog or frequency output modes.
Provides instructions for cleaning the flow tube and strut using soft brushes.
Warns against using wire brushes or high-pressure liquids to avoid transducer damage.
