J 133 User Manual

J/133 OWNER GUIDE 5
Specifications
LOA 43.00'
LWL 37.80'
Beam 12.78'
Draft 7.5' (std.), or 6.25' (opt.)
Ballast 7,250 lb. (std.), 7,800 lb. (opt.)
Ballast Type Cast lead strengthened with antimony
Displacement (std boat) 18,250 lbs.
100% Sail Area 964 sq ft
IG 57.00'
ISP 60.40’
J 17.25'
P 54.00'
E 18.60'
Headstay Pin to Pin Length 59’ 2-3/4” (18052 mm)
Recommended Step Location Center mast step slot around standard bolt location
Engine
Yanmar®
54 hp 4JH4-CE, Saildrive SD-40
Fuel Capacity 50 US gallons
Engine Alternator Power Max 125 amp
House Battery Capacity 210 amp hours (add'l 105 amp optional)
Dedicated Engine Battery
Optima 1000 (1,100 CCA)
Battery Type AGM Glass Mat Batteries
Water Capacity 50 US gallons (std.) plus 40 gal. (opt.)
Interior Cabin Headroom 6.375’ (6’ 4-1/2”)
Limit of Positive Stability 130 degrees
LPG Capacity (2) 6 lb. Bottles – Locker can hold three
Hull & Deck Core Material
Baltek® Super-Light 45 End-Grained Balsa
Hull & Deck Molding Process
SCRIMP® Resin Infusion
Hull Blister Warranty 10 Years: Owner Transferable
Mast Height Above Water 64’ 9” (not including masthead instruments)
Displacement/Length Ratio 151
Sail-Area/Displacement Ratio 23
ISO Stability & Bouyancy (CE Mark) Category A
Recommended PHRF Rating 21

J 133 Specifications

General

Brand	J
Model	133
Category	Boat
Language	English