Do you have a question about the Jabra JOURNEY and is the answer not in the manual?
talk time | 20 hours |
---|---|
standby time | 45 days |
charging time | 2.5 hours |
length | 119.2 mm |
---|---|
width | 58.7 mm |
depth | 15.8 mm |
Tap to answer or end a call.
Slide to 'I' position to turn the product on.
Charge with the Micro USB charger.
Delivers great sound and noise cancellation with HD Voice Mic.
Enables voice dialing functionality (phone dependent).
Specifies talk time up to 20 hours and standby time up to 45 days.
Features HD Voice Mic for enhanced noise cancellation.
Allows voice control of the phone via the voice button.
Supports A2DP for transmitting music, podcasts, and GPS directions.
Offers an operating range of up to 10 meters (33 feet).
Supports HFP, HSP, A2DP, and PBAP Bluetooth profiles.
Ensure the speakerphone is fully charged before use.
Connect the speakerphone to your mobile phone via Bluetooth.
Connect via USB to car charger or computer.
Ensure Bluetooth is enabled on your mobile phone.
Set the speakerphone to pairing mode (rapid blue light).
Configure your phone to search for Bluetooth devices.
Select 'JABRA JOURNEY' on phone, confirm with PIN 0000 if prompted.
Mount on sun visor and position in front of user for best sound quality.
Stream music/GPS from phone; pauses for calls and resumes after.
Tap answer/end button or use voice commands 'Answer'/'Ignore'.
Handles one active call while another phone is ringing: accept, reject, or hold.
Manages active calls when one connected phone's call is on hold: switch or end.
Troubleshoot voice button issues, check phone's voice control support.
Check for obstructions and distance between devices.
Increase volume, ensure pairing, and check phone connection.
Re-follow pairing instructions if connection fails.
Procedure to remove all paired phone connections.
Features like call hold, redial, voice dialing depend on phone's HFP support.
Avoid extreme temperatures to prevent battery and performance issues.
Do not expose the device to rain or liquids.