Jabra Motion UC MS User Manual

Jabra Motion UC MS
How do I pair my Jabra Motion with my mobile device?
To pair the Jabra Motion with your smartphone, tablet, or other mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Motion by closing the boom arm.
3. To enter pairing mode, press and hold (5 seconds) the Call button on
your Jabra Motion and simultaneously open the boom arm. Release the
Call button when the light flashes blue.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Motion from the list of available devices.
Enter “0000” (four zeros) if you are asked for a PIN. The headset will
announce when it is paired.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
07/04/2023 17:21
https://www.jabra.ie/supportpages/jabra-motion-uc/6630-900-300/faq/daae5d7b-7e77-
4558-b1aa-276bfdebee35
Page 1 of 2

Jabra Motion UC MS Specifications

General

Headset type	Monaural
Product type	Headset
Product color	Black, Silver
Wearing style	Ear-hook
Recommended usage	Calls/Music
Impedance	- Ω
Magnet type	-
Ear coupling	Intraaural
Headphone frequency	- Hz
Microphone type	Boom
Standby time	360 h
Charging time	2 h
Windows operating systems supported	Yes
Wireless range	100 m
Connectivity technology	Wireless

Weight and Dimensions

Weight	17.5 g