Jabra Motion Office MS User Manual

Jabra Motion Office MS
How do I pair my Jabra Motion with my mobile device?
To pair the Jabra Motion with your smartphone, tablet, or other mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Motion by closing the boom arm.
3. To enter pairing mode, press and hold (5 seconds) the Call button on
your Jabra Motion and simultaneously open the boom arm. Release
the Call button when the light flashes blue.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Motion from the list of available devices.
Enter “0000” (four zeros) if you are asked for a PIN. The headset will
announce when it is paired.
Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
29/04/2024 09:02
https://www.jabra.com/en-gb/supportpages/jabra-motion-office/6670-904-
302/faq/daae5d7b-7e77-4558-b1aa-276bfdebee35
Page 1 of 2

Jabra Motion Office MS Specifications

General

Bluetooth	Yes
Wireless range	100 m
Connectivity technology	Wireless
Headset type	Monaural
Product type	Headset
Product color	Black, Silver
Wearing style	Ear-hook
Ear coupling	Intraaural

Weight and Dimensions

Weight	- g

Summary

Pairing Jabra Motion with Mobile Device

Enable Mobile Bluetooth

Ensure Bluetooth is enabled on your smartphone or tablet before pairing the Jabra Motion headset.

Power Off Jabra Motion

Close the boom arm to turn off your Jabra Motion headset before initiating the pairing process.

Activate Jabra Motion Pairing Mode

Press and hold the Call button for 5 seconds while opening the boom arm until the light flashes blue.

Connect to Jabra Motion

Select 'Jabra Motion' from your mobile device's Bluetooth menu. Enter '0000' if a PIN is requested.