Jabra Evolve 65 MS Mono - User Manual

Jabra Evolve 65 MS Mono
How do I pair my Jabra Evolve 65 with my mobile device?
To pair your Jabra Evolve 65 with your smartphone, tablet, or other
handheld mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. To enter pairing mode, hold (3 seconds) the On/off/pairing switch in
the Bluetooth position until the LED flashes blue. Alternatively, wear
the headset to hear the pairing instructions.
The headset is now ready to pair with your mobile device.
3. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Evolve 65 from the list of available devices.
Enter "0000" (4 zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
11/03/2024 01:32
https://www.jabra.com/supportpages/jabra-evolve-65/6593-823-309/faq/00cc28ed-
29a0-4c68-9df4-ceec90251fc2
Page 1 of 2

Jabra Evolve 65 MS Mono Specifications

General

Connectivity	Bluetooth, USB
Battery Life	Up to 14 hours
Microphone	Yes
Bluetooth Version	Bluetooth 4.0
Talk time	Up to 14 hours
Speaker size	28 mm
Ear Cushions	Leatherette
Busy Light	Yes
Wireless Range	Up to 30 meters
Compatibility	Microsoft Teams
Wearing style	Headband
Charging time	2 hours
Type	Mono headset
Microphone Type	Noise cancelling uni-directional microphone
Weight	79 grams

Summary

Pairing Jabra Evolve 65 with Mobile Device

Prepare for Pairing

Ensure Bluetooth is enabled on your mobile device.

Enter Headset Pairing Mode

Hold the On/off/pairing switch for 3 seconds until the LED flashes blue.

Connect to Jabra Evolve 65

Select the headset from your device's Bluetooth menu and enter '0000' if required.

Troubleshooting and Additional Guidance

Retry pairing or consult the Bluetooth Pairing Guide for assistance.