Jabra Evolve 65+ MS Stereo

To Next Page

Jabra Evolve 65+ MS Stereo

How do I pair my Jabra Evolve 65 with my mobile device?

To pair your Jabra Evolve 65 with your smartphone, tablet, or other

handheld mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. To enter pairing mode, hold (3 seconds) the On/off/pairing switch in

the Bluetooth position until the LED flashes blue. Alternatively, wear

the headset to hear the pairing instructions.

The headset is now ready to pair with your mobile device.

3. To pair, go to the Bluetooth menu on your mobile device and select

the Jabra Evolve 65 from the list of available devices.

Enter "0000" (4 zeros) if you are asked for a pin code.

Note

If pairing is not successful, try the pairing steps again, or try pairing with

a different Bluetooth device. For troubleshooting tips, see here.

Optionally, try using the Bluetooth Pairing Guide which provides detailed

steps for pairing with a mobile device.

13/02/2024 22:37

https://www.mea.jabra.com/supportpages/jabra-evolve-65/6599-823-

399/faq/00cc28ed-29a0-4c68-9df4-ceec90251fc2

Page 1 of 2

Need help?

Do you have a question about the Jabra Evolve 65+ MS Stereo and is the answer not in the manual?

Summary

Pairing Jabra Evolve 65 with Mobile Device

Enable Bluetooth on Mobile Device

Activate the Bluetooth setting on your smartphone, tablet, or other mobile device.

Enter Headset Pairing Mode

Hold the On/off/pairing switch in the Bluetooth position until the LED flashes blue.

Select Headset on Mobile Device

Go to your mobile device's Bluetooth menu and select 'Jabra Evolve 65'. Enter '0000' if prompted for a PIN.

Pairing Troubleshooting and Tips

If pairing fails, retry steps or consult the Bluetooth Pairing Guide for detailed assistance.

Applicable Products Overview