How do I change the base ringtone volume on my Jabra Pro
930 using voice prompts?
To manually change the base ringtone volume using voice prompts, use
the following steps:
1. To enter the voice-guided setup menu, wear the headset and then
press and hold the Volume up and Volume down buttons
simultaneously until you hear a beep and the voice prompt "Setup".
2. Use the Answer/end button to go through the settings until you
reach "Base ringtone volume".
3. Use the Volume up and Volume down buttons to go through the
values until you reach the level you want to set (for example
"medium"). Then press the Answer/end button to select and save the
volume setting.
4. To disable the setting, press and hold the Volume up and Volume
down buttons simultaneously, until you hear a beep and the voice
prompt "Goodbye". Then release the buttons.
https://www.jabra.sg/supportpages/jabra-pro-930/930-25-509-103/faq/d98c243a-
122e-462a-8f28-2415176e6869
Page 1 of 2
To Next Page
