Jabra SP200 User Manual

US/CA
PLEASE NOTE: Before using your new Jabra SP200 Speakerphone,
you must fully charge it and set it up by “pairing” it with your selected
Bluetooth device.
1 ABOUT YOUR JABRA SP200
1 Answer/End button
2 LED light
3 Charging socket
4 Volume wheel
5 On/o switch
6 Visor clip
2 CHARGING YOUR JABRA SP200
Insert the charger and remove when fully charged (the LED light turns
green when the device is fully charged).
3 TURNING YOUR JABRA SP200 ON AND OFF
Slide the on/o switch to turn the speakerphone on or o.
4 PAIRING THE JABRA SP200 WITH YOUR PHONE
First time pairing:
Turn the speakerphone on and it will automatically be in pairing mode.
The blue LED light will ash rapidly.

Jabra SP200 Specifications

Battery and Power

talk time	10 hours
stand by time	23 days
auto off	after 15 minutes

Connectivity

bluetooth version	2.0 with eSCO
headset profile support	yes
hands-free profile support	yes

Weight and Dimensions

weight	3 oz
length	4.8 in
width	2.2 in
depth	0.9 in