5
ENGLISH
TURNING YOUR HEADSET ON AND OFF
- Slide the on/off button towards the symbol “I” to turn
the headset ON. When you do so both indicators will
flash on the Jabra StatusDisplay™.
- Slide the on/o button towards the symbol “O” to turn
the headset o.
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure
called ‘pairing’. By following a few simple steps, a phone can
be paired with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra Talk 15 for the first time,
the headset will automatically start up in pairing mode –
i.e. it is discoverable for your phone. When the headset is
in pairing mode the Bluetooth
®
status indication on the
StatusDisplay™ is flashing.
2 Set your Bluetooth
®
phone to ‘discover’ the Jabra Talk 15
- Follow your phone’s instruction guide. First make sure
that Bluetooth
®
is activated on your mobile phone. Then
set your phone to discover new devices. This usually
involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu
on your phone and selecting the option to ‘discover’ or
‘add’ a Bluetooth
®
device.*
3 Your phone will find the Jabra Talk 15
- Your phone will find the headset under name “Jabra Talk
15”. Your phone then asks if you want to pair with the
headset. Accept by pressing ‘Yes’ or ‘OK’ on the phone.
You may be asked to confirm with a passkey or PIN.
Then use 0000
(4 zeros). Your phone will confirm when pairing is
complete and the Bluetooth
®
status indication on the
StatusDisplay™ will shift from flashing light to steady
light and the headset voice guidance will say “connected”.
* Phone dependent
To Next Page
Loading...
Need help?
General
Weight and Dimensions
