6
ENGLISH
Manual pairing mode
If you wish to use the headset with a dierent phone, or if
the pairing process was interrupted, you can manually set
the headset to pairing mode.
Make sure the headset is on. Press and hold the answer/end
button for approximately 5 seconds until the Bluetooth
®
icon turns from a steady light to a flashing light. Then repeat
steps 2 and 3 in the above pairing guide.
Connecting with your phone
Pairing is only needed the first time a headset and phone
are used together. When the headset and phone have been
paired once, they will automatically connect when the
headset is on and Bluetooth
®
is activated on the phone. The
headset can be used when it is “connected” to the phone. If
the devices are paired, but do not immediately connect, tap
the answer/end button. When your headset is connected the
Bluetooth
®
connection icon in the Jabra StatusDisplay™ will
be constant for 3 seconds and the headset voice guidance
will say “connected”.
WEARING STYLE
The Jabra Talk 15 is ready to be worn with or without the ear
hook. The ear hook can be removed and the headset can be
used with the eargels.
The eargels can be used for both left and right wearing. The
eargels come in two dierent styles to fit any ear. You can also
twist the eargel slightly to optimize the fit and comfort.
For optimal performance, wear the Jabra Talk 15 and your
mobile phone on the same side of your body or within line
of sight. You will get better performance when there are no
obstructions between your headset and your mobile phone.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
