S5 Workshop Manual Engine
10) Install rear oil seal bracket onto the
body.
Tightening Torque
Oil seal bracket: 10 ～ 12 N•m (100 ～ 120 kg/cm
2
)
11) Install flywheel baffle onto the body.
12) Install flywheel assembly and tighten bolts to the specified torque.
Tightening Torque
Flywheel bolt:
130 ～ 140 N•m (1300 ～ 1400 kg/cm
2
)
13) Install connecting disc onto the body.
14) Install drive disc and tighten bolts to the specified torque.
Tightening Torque
Drive disc: 130 ～ 140 N•m (1300 ～ 1400 kg/cm
2
)
To Next Page
Loading...
Need help?
General
