S5 Workshop Manual Engine
4) If there is crack or breaking on turbine blade, the turbine and shaft assembly can't
be used. If the blade only has slight bending, it can be used. But if there is serious
bending, it can't be used.
5) Inspect whether there is foreign matter blocked oil pipe in turbine core assembly.
6) Exhaust gas valve Inspection
Under the following pressure, inspect the operation of waste gas valve rod.
Normal value: 77.5 KPa (0.79 kgf/cm
2
)
3. Air Intake Manifold
1. Component
Vacuum boosting bent pipe
component
Connecting pipe of
breathing apparatus
To Next Page
Loading...
