Jack C4 - Page 49

E11 Stop over voltage
Pls check the voltage；pls reset the machine or restart；if cannot
solve the problem, pls contact the local agent 。
E12
System under
voltage
Pls check the voltage；pls reset the machine or restart；if cannot
solve the problem, pls contact the local agent 。
E13 Brake circuit Pls contact the local agent.
E14
Parameter read and
write problem
If cannot solve the problem, pls
restart the machine or contact the
local agent.
E15
The protection of
motor over speed
Reset the machine
E16 Motor reversal
Pls reset the machine；if cannot solve the problem, pls
contact the
local agent 。
E17
Running over
voltage（no）
Operation instructions-Error number form