Jack C4 Training Courseware

E27
Restore factory settings
error
After the shutdown is restarted, the factory settings are
restored.
EA1
Ascending count full
Press the
“P”key to clear, or set the P71 parameter to "5"
EA2
Descending count full
Press the
“P”key to clear, or set the P71 parameter to "5"
Operation instructions-Error number form
Note：When the machine shows any error, please press ,
it can broadcast the solution of the error.
Note： When the system reported E06(Presser foot lift safety switch)， After the presser foot is placed in
the correct position ，You need to press the "P" key to clear the E06 error
note： when Count full, no corresponding to the voice, the news broadcast "reservation"

Jack C4 Specifications

General

Product Introducti	ion-technical specifications
Type/Name	C4 The Fastest Automatic Overlock Machine
Highest Speed	7000rpm/min
Differential	0.7-2.0
Thread Wideth（mm）	1.5-8.0
Presser Foot Height（mm）	5.0-7.0
Needle Type	DCX27
Needle Bar Height	（general）10.4mm/12mm（heavy）
Needle Bar Stroke	（general）24.5mm/26mm（heavy）

Weight and Dimensions

Max Length(mm)	0.8-4.8