Jack JK-T781E Series User Manual

Standard：This adjustment is same as 781D serie.
781E Machine
mode and Number Comparison
table
Mode
781E
782E
783E
781EK
Number
on dial
1/2 1 5/4 1/2
：
Method：
1. Pull out the part, put up the canning.
2. Loose the screw, let the pointer front to the number you need. （The number
should be same as length of cutter) Then tighten the screw。
18.0：Adjustment of the button hole length
Feeding Crank
Loose screw
Pointer
Notice：After change the number on dial, then
should change the presser foot similar as the
length of button hole.

Jack JK-T781E Series Specifications

General

Brand	Jack
Model	JK-T781E Series
Category	Sewing Machine
Language	English