Jack JK-T781E Series User Manual

三、Parameters and fault codes
1、Operation button
Enter and determine the
stored content value
Enter the parameter content value,
any
changes of
the value, need to press the
key to save confirmation.
Enter the parameter area
function key
1. In normal boot mode, press the key
to enter the user parameter mode
2. Press and hold the key to enter the
technician parameter mode
Set the value increment /
parameter increment
1. In the parameter selection area,
as the
key to increase
the parameter
2.
In the parameter contents area, as the
key
to increase the value
Set the value decrement /
parameter decrement
1. In the parameter selection area,
as the
key to decrease
the parameter
2.
In the parameter contents area, as the
key
to decrease the value

Jack JK-T781E Series Specifications

General

Brand	Jack
Model	JK-T781E Series
Category	Sewing Machine
Language	English