Jack OA8200 User Manual

Page 1
JACK
®
Digital HDTV Over-the-Air Antenna
w/built-in SureLock
®
Digital TV Signal Meter
OA8200 - White • OA8201 - Black
SPECIFICATIONS
Dimensions: 11.25” H x 16” W x 12.5” L
Weight: 2.3 lbs.
Frequency Bands: VHF (47-230 Mhz) - 20 db gain
UHF (470-860 Mhz) - 25 db gain
Signal Meter
Frequency Response: 40-862 Mhz (Ch 2-69)
Powered Amplier: +12 Volt / 100 mA working
Power Supply: Wall Mt. Switch (included)
• Mfr. # PB1000 - power supply, white
Enclosure/Mount: ASA-Automotive grade
OPERATION
The Wall Mount Power Injector is a convenient way to
switch between your cable feed and over-the-air signals
from your JACK antenna.
To use the Power Injector, simply turn the unit on with the
ON/OFF button. When on (button depressed), the power
light will turn green indicating +12 volts to the antenna,
and the over-the-air signal from your JACK antenna will
be fed to the two TV outputs.
When off, the cable TV signal will be fed to the two TV
outputs if wired for cable TV input.
POSITIONING THE ANTENNA
1. Turn on antenna power at Power Injector Wall Mount Plate.
2. Turn on SureLock Signal Meter with switch on side of rotational knob enclosure.
3. Rotate attenuator dial fully clockwise.
4. Depress button on rotational knob and rotate antenna
until maximum number of LED lights illuminate on signal meter.
5. Rotate attenuator dial counter clockwise until last illuminated LED light ickers.
6. Rotate antenna to illuminate last ickering LED light.
7. Repeat steps 5 and 6 to pinpoint signal reception.
8. Follow instructions for TV or converter box to scan for available channels.
NOTE: In step 4, LED lights will illuminate from left (next to power) to right.
All LED lights may not illuminate depending on signal strength.
NOTE: Arrow on knob indicates which
direction antenna is pointing.

Jack OA8200 Specifications

General

Impedance	75 Ohm
Polarization	Horizontal
Mounting Style	Pole
Type	Outdoor
Connector Type	F-Type

Summary

Antenna Specifications

Dimensions and Weight

Details on the physical size and mass of the JACK Digital HDTV Antenna.

Frequency Bands and Response

Information on the radio frequencies the antenna can receive and its gain.

Power Amplifier and Supply

Specifications for the powered amplifier and its required power supply.

Enclosure and Mount Type

Details on the materials and mounting capabilities of the antenna enclosure.

Operation and Antenna Positioning

Power Injector and Signal Meter Operation

Instructions on using the power injector and the SureLock signal meter for antenna setup.

Antenna Positioning for Optimal Signal

Step-by-step guide to orient the antenna for the best signal reception using the signal meter.

Antenna Overview and Installation

Component Identification and Overview

Identifies key components of the JACK antenna system and provides an overall view.

Roof Thickness and Connector Selection

Guidance on selecting the correct connector based on vehicle roof thickness for installation.

Installing the Longer Connector

Specific instructions for installing the longer connector on thicker roofs.

Exterior Base Mount Installation

Site Selection and Clearance Requirements

Criteria for choosing the mounting location on the vehicle roof, including clearances.

Drilling and Coax Cable Routing

Steps for drilling the roof hole and routing the coax cable for the antenna base mount.

Securing and Sealing the Base Mount

Instructions for attaching the base mount to the roof and properly sealing all holes.

Interior Enclosure Installation

Enclosure Base and Knob Attachment

Steps for fitting the interior enclosure base and attaching the rotation knob.

Coax Connection and Cover Fitting

Instructions for connecting the coax cable to the signal meter and securing the enclosure cover.

Wall Mount Power Injector Installation

Power Injector Requirements and Features

Details on power needs, connector types, and operational characteristics of the power injector.

Wiring Diagram and Connections

Visual guide showing how to connect the power injector to the antenna and TVs.

Limited Warranty Information

Warranty Coverage and Duration

Details on the parts and labor warranty period for the JACK antenna system.

Warranty Exclusions and Claims

Information on what voids the warranty and how to submit a warranty claim.