07610-004-34-16-A
I/O MODULE REPLACEMENT
DISHSTAR SERIES/
DELTA HT-E-SEER
1 of 3
WARNING: This part should be installed only by qualified service personnel to reduce the risk of
electric shock, serious injury, or fire. A plumbing permit and the services of a licensed plumber and
electrician might be required in some areas.
Turn o the power supply and place the dishwasher disconnect (if applicable) in the o position.
Lockout/tagout to prevent the power supply from being turned back on inadvertently.
CAUTION: Failure to install this part within the guidelines might adversely aect safety, performance,
component life, and warranty coverage.
!
CAUTION
!
WARNING
DISHSTAR/DELTA I/O MODULE KIT - 06401-004-76-15
TOOLS REQUIRED
• 7/16” Wrench
• Phillips Screwdriver
PARTS INCLUDED
QTY
DESCRIPTION PART NUMBER
1 I/O Module 05945-004-36-34
1 Instructions, I/O Module Replacement 07610-004-34-16
1. Remove front panel using 7/16” wrench and set aside.
I/O MODULE
REPLACEMENT
7/16” wrench used
in this step.
To Next Page
