To Next PageTo Next PageWhy is there no pressure indication on my Jackson Upright Door Dishmachines Tempstar?
If there's no pressure indication on your Jackson Dishwasher, it could be due to the water being turned off, a disconnected transducer, or a defective pressure transducer. Ensure the water is turned on. Verify the wiring of the transducer. Replace the pressure transducer if it is defective.
How to solve water leaks at the wash pump of my Jackson Dishwasher?
If you're experiencing water leaks at the wash pump of your Jackson Dishwasher, it could be due to a defective wash pump seal, a petcock or pump drain that isn't shut or tight, or loose hoses on the wash pump. Replace the wash pump seal. Close or tighten the petcock or pump drain. Tighten the hose clamps on the wash pump.
Why won't my Jackson Dishwasher rinse during autocycle?
If your Jackson Dishwasher won't rinse during the autocycle, it could be due to a defective rinse solenoid, a faulty timer, or no water supply to the machine. Repair or replace the rinse solenoid as required. Replace the timer. Verify that there is water at 10 PSI connected to the machine.
General| Brand | Jackson |
|---|---|
| Model | Upright Door Dishmachines Tempstar Series |
| Category | Dishwasher |
| Language | English |
