Jackson ECOLAB ES-2000HH User Manual

INSTALLATION & OPERATION MANUAL
FOR ECOLAB MODELS:
ES-2000
ES-2000-CS
ES-2000HH
ES-2000HHV
ES-2000-V
ES-2000XSP
ES-2000XSP-PH
ES-4000
ES-4000XSP
ES-4000CDL
ES-4000CDR
www.ecolab.com
ES SERIES DOOR TYPE, CHEMICAL SANITIZING,
SINGLE AND DUAL RACK DISHMACHINES
December 5, 2007
P/N 7610-011-35-10 (Revision O)
Manufactured in the United States by:

Jackson ECOLAB ES-2000HH Specifications

General

Brand	Jackson
Model	ECOLAB ES-2000HH
Category	Dishwasher
Language	English

Summary

Section 2: Installation/Operation Instructions

Installation Instructions

Covers visual inspection, unpacking, leveling, and plumbing connection procedures for the dishmachine.

Electrical Installation Instructions

Details proper electrical power connection and voltage checks for safe dishmachine operation.

Operating Instructions

Chemical Dispensing Equipment

XSP Dispenser Preparation

Chemical Set-Up

Section 4: Troubleshooting

Common Problems

Lists common dishmachine issues and their potential causes and solutions.

XSP Common Problems

Details specific troubleshooting steps for issues related to XSP dispenser units.

Section 5: Service Procedures

Rinse Solenoid Valve Repair Parts Kit

Provides detailed steps for repairing or replacing components of the rinse solenoid valve.

Vacuum Breaker Repair Parts Kit

Section 7: Electrical Schematics

ES-2000/ES-2000-CS (115 Volt, 60Hz, Single Phase)

Electrical schematic for ES-2000 and ES-2000-CS models.

ES-2000-V/ES-2000HHV (115 Volt, 60Hz, Single Phase)

Electrical schematic for ES-2000-V and ES-2000HHV models.

ES-4000 (115 Volt, 60Hz, Single Phase)

Electrical schematic for ES-4000 models.

ES-4000CDL/ES-4000CDR (115 Volt, 60Hz, Single Phase)

Electrical schematic for ES-4000CDL and ES-4000CDR models.

ES-4000XSP (115 Volt, 60Hz, Single Phase)

Electrical schematic for ES-4000XSP models.