Jacob Jensen T10 User Manual

D.10 HANDSET NAME
You can select the type of information displayed during a call – the time or the call or the caller’s
number (if available). The default setting is Time.
Key Map:-
Æ Display – Æ Talk DisplayÆ Æ select Time/NumberÆ
1. Press the button to access the main menu.
2. Press
/ button to select “Display”. Press button.
3. Press
/ button to select “Talk display” . Press button.
4. Press
/ button to select Time” or “Number”. Press button.
5. Press the
button to exit and return to standby mode.
D.11 TONES
Key Map:-
Æ Audio Setting – Æ TonesÆ Æ select your optionÆ Æ select
on/offÆ
You can switch on or off the tones for key touch, confirmation, call waiting, and out-of-range alarm.
For example, when the key tone is set to ON, you will hear a tone each time you press a keypad
button.
1. Press the
button to access the main menu.
2. Press
/ button to select “Audio Settings”. Press button.
3. Press
/ button to select “Tones” . Press button.
4. Press
/ button to select the option (i.e. Warning, Call waiting, Range Alarm)
and
to confirm.
5. Press
/ button to display either “On” or “Off” and press button to confirm.
For key tone, select from pattern 1-3 or off and press
button.
6. Press the
button to exit and return to standby mode.

Jacob Jensen T10 Specifications

General

Brand	Jacob Jensen
Model	T10
Category	IP Phone
Language	English