To Next PageTo Next PageWhat to do if my Jacobsen LF 3400 Lawn Mower engine stops?
If the Jacobsen Lawn Mower engine stops, refill with fresh fuel and bleed the fuel lines. Also, make sure all interlocks are properly set before leaving the operator’s seat by engaging the parking brake and setting the mow switch to OFF.
How to fix uneven cuts from my Jacobsen Lawn Mower?
Uneven cutting with a Jacobsen Lawn Mower can be caused by several factors: 1. Incorrect bedknife-to-reel adjustment: Inspect and adjust as necessary. 2. Low engine speed: Check the engine speed. 3. Improper mow speed: Adjust the mow speed to suit the turf conditions. 4. Mow switch in reverse: Set the switch for forward rotation. 5. Insufficient rear roller pressure: Move the down pressure spring one hole towards the spring. 6. Inadequate front roller following: Move the down pressure spring one hole away from the spring.
General| Cutting Width | 100 inches |
|---|---|
| Number of Reels | 3 |
| Engine Type | Diesel |
| Transmission | Hydrostatic |
| Speed Range | 0-8 mph |
| Deck Material | Steel |
| Blade Type | Reel |
| Engine | Kubota Diesel |
