EasyManua.ls Logo

Jacuzzi J - 415 - J-1000 Audio System Stereo Troubleshooting; J-1000 Audio System Stereo Specifications

Jacuzzi J - 415
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 108
J-400
20.9 J-1000 Audio System Stereo Troubleshooting
1. Unit will not turn-on
Make sure spa power is turned on, then
check both harness fuses on side of unit
making sure they are the proper ratings:
Yellow memory B+ line (10A fuse).
When faced with a malfunction during
operation, push BND button (8) and Eject
button (13) at the same time to reset
software.
With spa power off, use a paperclip to
press the reset button located besides the USB Docking Station (10)
to do a hardware reset.
Note: It will be necessary to re-enter the radio preset memories and
other personal settings after performing a reset. After resetting player,
always ensure all functions are operation correctly.
2. Fogged CDs and Lens
This condition may occur when it’s cold. Wipe fogged CDs with a soft
cloth. Fogged optical components inside the unit will return to normal
operation after an hour in a heated environment.
20.10 J-1000 Audio System Stereo Specifications
Tuner
FM usable sensitivity ....................................10 dB
FM 50 dB quieting sensitivity ..............................25 dB
FM alternate channel selectivity ............................80 dB
FM stereo separation @ 1 kHz.............................30 dB
AM usable sensitivity ....................................35 dB
CD Player
Sampling frequency (8X oversampling) . . . . . . . . . . . . . . . . . . . .44.1 kHz
Channel separation @ 1 kHz ..............................50 dB
Signal-to-noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 dB
Frequency-to-noise response @ +/-2 dB ................. 20-20 kHz
Audio
Maximum power output .......(45 watts x 4 channel, 4Ω, 1 kHz) 180W
Continuous power.............18 watts x 4, 4 ohms, THD = 1%,1 kHz
Bass boost/cu.................................100 Hz +/- 10 dB
Treble boost/cut ................................10 kHz +/-10 dB
General
Nominal power supply ................................14.4 VDC
Allowable power supply ...........................10.8-15.6 VDC
Current consumption .................................. <15 mA
Speaker impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Ω
USB

Table of Contents

Related product manuals