Jacuzzi K272000AF - Page 11

ENGLISH
MITO™ 5, Left Hand
30"
42"
*60"
10" x 4"
2"
11-7/8
"
Motor
12" H x 18" L
Service Access
Opt. Service
Access
5-3/8"
MITO™ 5, Right Hand
30"
42"
*60"
10" x 4"
2"
11-7/8"
Motor
12" H x 18" L
Service Acces
s
O
pt.
S
ervice
Access
5-3/8"
ROUGHING-IN REFERENCE (RECTANGULAR)
11
Jacuzzi Whirlpool Bath K272000AF 7/06
LUXURA™ 5 WITH INTEGRAL SKIRT, Left Hand
2-1/2"
12" x 5"
8-1/4"
Motor
2-1/2"
5-1/4"
*60"
15-3/8"
32"
LUXURA™ 5 WITH INTEGRAL SKIRT, Right Hand
2-1/2"
12" x 5"
8-1/4"
Motor
2-1/2"
5-1/4"
*60"
15-3/8"
32"
12" x 5"
2-1/2"
*66"
17"
34"
8-3/8"
LUXURA™ 5.5, Left Hand
Motor
12" H x 18" L Service Access
Opt. Service Access
2-1/2"
5-3/8"
LUXURA™ 5.5, Right Hand
12" x 5"
2-1/2"
*66"
17"
34"
8-3/8"
Motor
12" H x 18" L Service Access
Opt. Service Access
2-1/2"
5-3/8"
2-1/2"
*60"
14-3/8"
30"
12" x 5"
9-1/4"
LUXURA™ 530 WITH INTEGRAL SKIRT, Left Hand
Motor
2-1/2"
5-7/8"
LUXURA™ 530 WITH INTEGRAL SKIRT, Right Hand
2-1/2"
*60"
14-3/8"
30"
12" x 5"
9-1/4"
Motor
2-1/2"
5-7/8"
MAJORA™ 5, Left Hand
42"
*60"
21"
8-3/4"
10" x 4"
2"
Motor
12" H x 18" L Service Access
Opt. Service Access
4-3/8"
MAJORA™ 5, Right Hand
42"
*60"
21"
8-3/4"
10" x 4"
2"
Motor
12" H x 18" L Service Access
Opt. Service Access
4-3/8"
MAJORA™ 6, Left Hand
42"
*72"
12" x 4"
21"
2"
10-1/2"
Motor
12" H x 18" L Service Access
Opt. Service Access
4-3/8"
MAJORA™ 6, Right Hand
42"
*72"
12" x 4"
21"
2"
10-1/2"
Motor
12" H x 18" L Service Access
Opt. Service Access
4-3/8"
MAJORA™ 6 W/INTEGRAL SKIRT, Left Hand
42"
*72"
12" x 4"
20-1/2"
2"
8-1/2"
Motor
4-3/8"
MAJORA™ 6 W/INTEGRAL SKIRT, Right Hand
42"
*72"
12" x 4"
20-1/2"
2"
8-1/2"
Motor
4-3/8"
MITO™ 6, Left Hand
36"
42"
*72"
11-7/8"
10" x 4"
2"
Motor
12" H x 18" L
Service Access
Opt. Service
Access
5-3/8"
ROUGHING-IN
*Add 1/4" (6,4 mm) to this dimension when roughing-in for 3-wall niche.
NOTE: 1. The overall dimensions are nominal with a tolerance of +0 and -1/4" (6,4 mm).
2. Service Access dimensions given are minimum. Service access is still required for units that do not have pre-installed Pump/Motor.
3. Measurements inside each unit represent cutout in floor to allow for drain/overflow.
4. All measurements are in inches. To convert to millimeters, multiply inches by 25.4.
5. Not all export units come with pre-installed Pump/Motor.