
Do you have a question about the Jacuzzi SHER80 and is the answer not in the manual?
| Brand | Jacuzzi |
|---|---|
| Model | SHER80 |
| Category | Swimming Pool Filter |
| Language | English |
Locate unit on a solid foundation near pool/spa, considering drainage and access for servicing.
Connect filter inlet/outlet using 1-1/2" or 2" NPT threads and install valves for below-water-level installations.
Ensure assembly is tight, open air relief, perform start-up, and close vent when droplets appear.
Consult dealer for local advice. Drain system and clean filter element for storage to prevent damage.
Steps to remove, clean with a hose, and dry the filter element when pressure increases by 10 psi.
Guide to cleaning O-ring, dirt catcher, seating the cartridge, and securing the cover and nut.
Loading...