Need help?Do you have a question about the Jadac THINGMAGIC M6e and is the answer not in the manual?
Describes the different hardware variants of the M6e module, including M6e, M6e-A, M6e-PRC, and M6e-JIC.
Provides information on firmware compatibility, MercuryAPI integration, and specific module requirements.
Covers antenna connections, digital/power connector, UART, and USB interfaces with detailed specifications.
Details electrical specifications, power modes, RF power output, and consumption figures for the M6e module.
Outlines operating temperature, Electro-Static Discharge (ESD) precautions, and physical dimensions.
Details new features in firmware version 1.21.2, such as Margin Read and UCODE7 support, and procedures for upgrading.
Covers Gen2 parameters in metadata, support for specific Gen2V2 tags, and protocol configurations like T4 timer.
Describes the command-response mechanism, packet formats, and host-to-reader communication for serial interfaces.
Details supported tag protocols like ISO 18000-6C, IP-X, ISO 18000-6B, and AEI ATA with configuration options.
Lists supported regions, regulatory compliance, frequency settings, and hop table characteristics.
Explains the four antenna ports and how to use a multiplexer for expanding the number of logical antenna ports.
Provides a detailed summary of all technical specifications for the M6e module, including ordering, physical, protocol, RF, power, and environment.
Covers RF output power limits, interference statements, user manual requirements, and labeling for FCC and Industry Canada.
Presents the European Union Declaration of Conformity for the M6e module, referencing relevant standards and directives.
Lists common fault messages, their codes, causes, and suggested solutions for operational issues.
Details errors related to the bootloader, flash memory operations, and potential corruption issues.
Lists components included in the development kit and provides instructions for initial setup and connecting to a PC.
Explains USB interface options (Native USB, USB/RS232) and the function of development kit jumpers.
Discusses ESD susceptibility, damage overview, diagnostic methods, and common installation best practices for prevention.
Provides installation guidelines, recommends best practices for minimizing ESD, and methods for raising ESD tolerance.
General| Brand | Jadac |
|---|---|
| Model | THINGMAGIC M6e |
| Category | Control Unit |
| Language | English |
To Next Page