Jadever SNUG III-300 - User Manual

JADEVER SCALE
SNUG III
0
CONTENTS
Ⅰ.
Preparation before using
1-1. Cautions before using……………………………………………………………
1-2. Specification and characteristics of products …………………………………
1
1
Ⅱ.
Introduction and installation of products
2-1. Assembly specification of scale pan and windshield ……………………….
2-2. Removal of protecting screws…………………………………………………
2-3. Adjustment of leveler…………………………………………………………...
2-4. Function specification of buttons and display window………………………
2
2
3
3
Ⅲ.
Applications of general functions
3-1.Specification of weighing function……………………………………………..
3-2.Specificatin of counting function……………………………………………….
3-3.Specification of percentage function…………………………………………..
3-4.Setting of time and date…………………………………………………………
4
4
5
5
Ⅳ.
Setting of various parameters
4-1. Entry and parameter adjustment mode……...……………………………….
4-2.Specification of parameter and function………………………………………
6
6
Ⅴ.
Weight calibration
5-1.List of calibration weights…………………………………………………………
5-2.Linear calibration of weight………………………………………………………
…
5-3.Single-point calibration of weight………………………………………………
10
10
11
Ⅵ.
Interface of peripheral devices
6-1. RS-232 specification…………… …………………………………….……....
6-2. Printing format of peripheral devices….………………………………..........
6-3.Specification of USB interface application…………………………………….
12
13
13
Ⅶ.
Miscellanies
7-1.Specification of trouble information…………...............................................
7-2.List of unit conversion…………………………………………………………...
7-3.Warranty of product………………………………………………………..…….
14
14
15

Summary

Preparation Before Using

Cautions Before Using

Safety advice for scale placement, environment, and handling.

Specification and Characteristics of Products

Details on models, capacity, resolution, display, pan size, and power supply.

Introduction and Installation of Products

Adjustment of Leveler

Steps to ensure the scale is horizontal using the built-in leveler.

Function Specification of Buttons and Display Window

Applications of General Functions

Weighing Function Specification

Detailed steps for performing a weighing operation and changing units.

Counting Function Specification

Percentage Function Specification

Setting of Various Parameters

Entry and Parameter Adjustment Mode

Steps to enter and navigate the parameter adjustment mode.

Selection of Units to be Used

Setting of RS-232 Transmission Function

Anti-vibration Function

Weight Calibration

List of Calibration Weights

Table of required calibration weights for different scale models.

Single-point Calibration of Weight

Step-by-step guide for performing a single-point weight calibration.

Linear Calibration of Weight

Instructions for conducting a linear weight calibration using multiple points.

Miscellaneous Information

Specification of Trouble Information

Lists common error codes, their causes, and solutions.

Jadever SNUG III-300 Specifications

General

Capacity	300 kg
Division	100 g
Units	kg, lb
Material	Stainless steel platform
Power Supply	AC Adapter or Rechargeable Battery
Display	LCD
Functions	Counting, Weight