Jadis Orchestra reference User Manual

Maintenance
Your Jadis amplifier is adjusted for a nominal voltage
corresponding to your country's electrical network.
If the amplifier fails to operate:
1 - Turn OFF the unit immediately.
2 - Unplug all the cables.
3 - Do not forget the mains cord.
4 - Contact your Jadis dealer for diagnostic and repair.
To clean your amplifier, use a soft cloth with a non abrasive
cleaning product.
Do not forget to unplug all connectors before cleaning.

Jadis Orchestra reference Specifications

General

Input Impedance	100 kΩ
Power Output	2 x 40W
Frequency Response	20Hz - 20kHz
Output Impedance	8 Ω
Output Power	2 x 40W
Inputs	4 x Line