37
display the correct day or night indicator in
the small 24 hour dial to the left of the small
dial. For this, observe the zone indicated by
the hand: the light zone indicates daytime, i.e.
the period between 6 a.m. and 6 p.m.
Push the crown back in to position 0.
Following this operation, the time in the dial
of the 2
nd
time zone will be the same as that
in the main dial. This is normal, as the window
at 6 o'clock indicates the city corresponding
to the local time zone. Both displays are thus
synchronised.
City selection: automatic display of hours and
minutes in the 2
nd
time zone.
Note: make sure that the synchronisation
crown (Crown A at 3 o'clock) has been pushed
back into position 0 (not pulled out). Failure
to follow this instruction could damage the
adjustment mechanism.
Turn Crown B (without pulling it) in either
direction and display the selected city for
the 2
nd
time zone at 6 o'clock, opposite the
triangular marker. The time in the selected time
ENGLISH
To Next Page
Loading...
Need help?
General
