Jam Heavy Metal HXP920 User Manual

60
200
59
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P920
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P920)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Heavy Metal needs about 3 hours for up to 8 hours of party time.
The LED light on your speaker lets
you know what it’s doing.
1. The cord that came with the speaker
— the one with the USB on one end
and the micro USB on the other — will
work with your computer.
2. If you want to use the wall outlet, you
can use the included adapter or use any
USB AC adapter, including the one for
your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one
between your device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Heavy Metal in your device’s Bluetooth list or click YES.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and Bluetooth will find each other every time, as long as the
speaker is set to Bluetooth and your device’s Bluetooth is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and
hold the - and + buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Heavy Metal but haven’t started the party yet, it
will automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the JAM Heavy Metal will automatically shut off to preserve battery power.
Thank you for purchasing
the JAM Heavy Metal.
Check out the sections
below for all the
important information
about your new speaker.
Pairing Mode
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
Continued on page 2.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
Bluetooth
®
Devices
JAM Heavy Metal
on
>
3s
or
3h
1. This is the power button
2. Turn the music down
3. Turn the music up
4. Skip back a track
5. Push it to play, push it again to pause
6. Jam on to the next song
7. Shed some light on what your speaker is
doing (see chart to the right for details)
8. Toggle between languages here
9. The power cord goes here
10. Here’s where you hook it up old-school
11. Language selector pin
11
2
1
3
4
5
6
7
8
9
10

Jam Heavy Metal HXP920 Specifications

General

Type	Portable Bluetooth Speaker
Bluetooth Range	Up to 30 feet
Battery Life	Up to 8 hours
Signal-to-Noise Ratio	80 dB
Power Supply	Rechargeable Lithium-ion Battery
Power Output	20W
Frequency Response	60Hz - 20kHz

Summary

Contact and Support

Customer Service

Provides contact details for consumer relations representatives via phone and email for assistance with product questions.

Product Registration

Links to websites for registering your speaker, vital for feedback and product development.

Getting Started

Charging the Speaker

Explains the two options for charging the speaker: via computer USB or a wall outlet, noting charge time and battery life.

Speaker Controls Overview

Details the function of each button on the speaker for power, music playback, track skipping, and language selection.

LED Indicator Guide

Explains the meaning of the LED light states for pairing mode, low battery, connection status, charging, aux-in, and ready to party.

Bluetooth Connection

Initial Pairing Process

Guides users through connecting their device to the speaker via Bluetooth for the first time.

Automatic Reconnection

Explains how the speaker automatically finds and connects to previously paired Bluetooth devices.

Managing Pairings

Describes how to activate pairing mode to connect new devices or disable existing ones.

Advanced Features

Wired Audio Connection

Instructions for connecting the speaker using an auxiliary cable to devices without Bluetooth capability.

Cleaning Instructions

Recommends using a soft, dry towel for cleaning and advises against using liquids or harsh cleaners.

Speakerphone Functionality

Details how to answer, end, reject, and manage calls using the speaker's play/pause button.

Voice Prompts and Languages

Explains the speaker's voice prompts and how to change the language using the selector pin.

Warranty and Disclaimers

Warranty Information

Directs users to specific websites for detailed warranty instructions and how to obtain service.

FCC Compliance

Outlines the FCC rules and conditions regarding device operation and potential interference.

Important Safeguards

Lists crucial safety precautions to follow when using the speaker, including hearing and water warnings.

Environmental Information

Provides warnings on battery disposal, potential hazards from small parts, and chemical content for California residents.