Jam Transit HX-HP420 - User Manual

To Next Page

USER GUIDE AND WARRANTY INFORMATIONwww.jamaudio.com

HX-HP420

Where There’s A Jam, There’s A Party!

™

READ UP. PARTY DOWN.

HEY. HAVE WE SEEN YOU HERE BEFORE?

PACKAGE CONTENTS

about where you bought them and how you’re using them is like

gold for the people who make these headphones. Do them a

solid, will ya?

Por manual de instrucciones e información de garantía en

español visítenos en www.jamaudio.com

There are lots of cool Jam speakers. Check them all out at

www.jamaudio.com

Charging the headphones is so easy you’ve

probably ﬁgured it out by now, but just in

case, you’ve got two options: You can charge

it using your computer or a wall outlet.

1. The cord that came with the headphones

—the one with the USB on one end and

the Micro USB on the other—is made to

work with your computer.

2. If you want to use the wall outlet, you’ll need to

pick up a power cord with a Micro USB the

next time you’re at the store, or use any USB

AC adapter (DC 5V +/– 0.25V rated current:

>250mA), including the one for your cell.

Plug it in and your headphones will be ready for an

epic night in no time. You should go get ready too!

They need about 3 hours for 11 hours of party time.

Headphones

Packaging doubles

as carrying case

User Manual Charging Cord

1. This is the power button, press and hold for 5 seconds to

power on. Push it to play, push it again to pause

2. Turn the music up or down (Wait, why would you turn it down?)

3. The power cord goes here

4. Skip back a track or jam on to the next song

5. This light lets you know when Bluetooth is paired with your

headphones

6. Check out how much juice is in the battery

Like any amazing couple, this one starts with a connection

—one between your device and the headphone’s Bluetooth.

1. We know you’re probably going to think, “derp” with this one,

but we have to say it: Make sure the smartphone, tablet or

computer you want to hook up to the headphones has

Bluetooth. (There. We got that out of the way.)

2. Turn on the headphones and look for the little blinking light.

3. Do whatever your device needs you to do on its end. (We

don’t know what you’re using. We’re not spies.)

4. Look for Jam Transit Headphones in your device’s Bluetooth

list or click YES—whatever pops up on your device—and

BAM! you’re connected.

5. Now hit PLAY on your headphones and crank it up—or down

if you’re lame.

You’re probably only going to have to do this once, unless your

device goes through a major I-just-dropped-it-in-the-pool kind

of reboot. The device and Bluetooth will ﬁnd each other every

time just as long as the headphones are set to Bluetooth and

your device’s Bluetooth is, you know—on.

If you’re connecting to a computer, you may have some extra

steps on that end. You’ll have to get that information from the

computer company.

Depending on your device you may be prompted to enter a

pairing code. If prompted enter “0000” as the code.

Press and hold the +/– button for 5 seconds to activate pairing

mode.

Note: If you turn on your Transit Headphones but haven’t started

the party, they will automatically power off after 2 minutes of

unpaired inactivity.

JUST CHARGE IT

Wall adapter

not included

CONTROL YOUR DESTINY…OR AT LEAST YOUR

HEADPHONES

FEATURES:

ALLOW US TO SHED SOME LIGHT

BLUETOOTH

CONNECTION: IT’S A SETUP

Flashing Red

What It Looks Like

CHARGE

What It Means

Low Battery

RED (when plugged in) Charging

LED OFF (full charged) Ready to Party

Quick Flash BLUE/RED Pairing Mode

Slow Flash BLUE Connected

When friends call to interrupt your party of one—and you know

they will—answer the phone without disconnecting from your

JAM Transit. Yes, that’s right. Your headphones are a

speakerphone too. How amazing is that?

Here’s how it works:

1. Make sure your phone and headphones are connected

through Bluetooth.

HELLO? SPEAKERPHONE? YES!

2. Answering and ending a call works the same way: simply click

the PLAY/PAUSE button on your Transit.

3. If you’d rather not talk, hold down the PLAY/PAUSE button on

your Transit for three seconds to ignore the call.

THE COOLEST PART: The Transit knows when a call is coming

in and pauses the music before ringing. When you hang up, the

music starts where it left off—and so does the party. If it’s you

making the call, just start dialing from your phone, and the

Transit automatically does its hands-free thing. Isn’t it refreshing

to know your headphones totally get you?

Need help?

Do you have a question about the Jam Transit HX-HP420 and is the answer not in the manual?

Summary

Jam Transit Package Contents

Included Headphones and Accessories

Details the items found within the Jam Transit headphones packaging.

Charging Your Jam Transit Headphones

Headphone Charging Methods

Explains how to charge the headphones using a computer or a wall outlet.

Controlling Your Jam Transit Headphones

Headphone Control Functions

Details the functions of the power, playback, volume, and track control buttons.

Jam Transit LED Indicator Meanings

Guide to understanding the status lights for charging and Bluetooth connectivity.

Connecting and Using Jam Transit

Bluetooth Pairing and Connection

Step-by-step guide to connecting the headphones to a Bluetooth device.

Speakerphone Functionality

Instructions on using the headphones as a speakerphone for calls.

Jam Transit Maintenance and Safety

Cleaning the Headphones

Recommended method for cleaning the headphones to avoid damage.

FCC Compliance Statement

Information regarding FCC rules and device compliance.

Important Safety Precautions

Essential safety guidelines for using the headphones responsibly.

Environmental and Battery Warnings

Information on battery disposal and potential choking hazards.

Jam Transit Warranty Information

One Year Limited Warranty Details

Details on warranty coverage and how to obtain service.