Jam Transit Touch HX-HP910

To Next Page

HEY THERE!

JUST CHARGE IT

WE’RE HERE TO HELP. CONTACT US!

HX-HP910

USER GUIDE AND

WARRANTY INFORMATION

You’ve got questions? We’ve got answers.

Contact a Consumer Relations representative by

phone or email to help answer any questions.

Please be sure to have the model number of your

product available. (Hint: It’s HX-HP910)

you bought them and how you’re using them is like

gold for the people who make these headphones.

To register, visit:

USA: www.jamaudio.com/customer-support/product-registration

CAN: canada.jamaudio.com/product-registration

Charging the headphones is so easy you’ve probably ﬁgured it out by now, but just in case, you’ve got two options: you can charge

them using your computer or a wall outlet. The Transit Touch needs about 3 hours for up to 12 hours of party time.

The LED light on your headphones lets

you know what they’re doing.

1. The cord that came with the headphones —

the one with the USB on one end and the micro

USB on the other — will work with your

computer.

2. If you want to use the wall outlet, you’ll need

to pick up a power cord with a micro USB the

next time you’re at the store, or use any USB AC

adapter, including the one for your cell phone.

CONTROL YOUR DESTINY ... OR AT LEAST YOUR HEADPHONES

SHED SOME LIGHT

BLUETOOTH

CONNECTION — IT’S A SETUP

1. This is the power button. It also lets you know what

your headphones are up to (see chart below for details)

2. The power cord goes here

3. Aux-in port to hook it up old-school

4. Touchpad — swipe or tap to control your headphones

5. Swipe clockwise to crank the music up

6. Swipe counter-clockwise to turn the music down

7. Tap to play, tap again to pause

8. Swipe forward or up to jam on to the next track

9. Swipe back or down to move to the previous track

Like any amazing couple, this one starts with a

connection — one between your device and the

headphones’ Bluetooth. Here’s how it works:

1. Make sure the smartphone, tablet, or

computer you’re using with the headphones

has Bluetooth.

2. Turn on the headphones (press and hold the

power button for 3 seconds) and look for the

little blinking light.

USA

cservice@jamaudio.com

1.888.802.0040

8:30am–7:00pm EST M–F

cservice@homedicsgroup.ca

1.888.225.7378

8:30am–5:00pm EST M–F

CANADA

3. Do whatever your device needs you to do on its end.

4. Look for JAM Transit Touch Headphones in your device’s

Bluetooth list or click YES.

5. Now hit PLAY on your headphones and crank it up — or down if

you’re lame.

The device and Bluetooth will ﬁnd each other every time, as long as

the headphones are set to Bluetooth and your device’s Bluetooth is,

you know, on.

If you’re connecting to a computer, you may have some extra steps

on that end. You’ll have to get that information from the computer

company.

Depending on your device, you may be prompted to enter a pairing

code. If prompted, enter “0000” as the code.

To disable pairing of an existing device and pair a new device, tap

and hold the touchpad for 6 seconds to activate pairing mode.

Note: If you turn on your Transit Touch Headphones but haven’t

started the party yet, they will automatically power off after 2 minutes

of unpaired inactivity.

Note: Once paired, if you pause the party for 15 minutes or more,

your headphones will automatically power off to preserve battery life.

Thank you for purchasing

the JAM Transit Touch.

Check out the sections

below for all the

important information

about your new

headphones.

Pairing Mode

Connected

Powering On

Charging

Ready to Party

Low Battery

Continued on page 2.

AC adapter not included.

Need help?

Do you have a question about the Jam Transit Touch HX-HP910 and is the answer not in the manual?

Summary

Welcome and Support

Contact and Registration

Find contact details for customer support and links for product registration in USA and Canada.

Charging Your Headphones

Headphone Controls and Indicators

Touchpad Gestures

Detailed guide on using the touchpad for music playback, volume control, and track skipping.

LED Status Indicators

Understand the meaning of the LED light colors for power, charging, pairing, and connection status.

Bluetooth Connection Setup

Initial Pairing Process

Steps to connect your headphones to a Bluetooth-enabled device for the first time.

Pairing Code and Auto-Off

Details on entering a pairing code and automatic power-off features for inactivity.

Wired Audio Connection

Instructions for connecting the headphones using the included audio cable for wired playback.

Hands-Free Calling

Guide to answering, ending, and managing calls using the headphone touchpad.

Product Warranty and Care

Warranty Information

Information on the 1-year limited warranty and how to obtain service.

Cleaning Instructions

Recommendations for cleaning the headphones using a soft, dry towel.

Regulatory and Safety Information

FCC and IC Compliance

Statements regarding compliance with FCC and Industry Canada regulations.

Important Safety Precautions

Essential safety guidelines, including listening responsibly, product usage, and warnings.