3
Kit Contents
CNC Laser cut formers and ribs, strip, die-cut selected balsa •
and light ply sheet.
Fitting kit including wheels, undercarriage, horns, hinges etc.•
Clear canopy.•
Instructions.•
Building the Model
1. Glue the formers, undercarriage mount and strengthening
struts shown above securely.
3. The completed fuselage cell.
2. Mount the battery plate, the wing supports and the blind nuts
to the assembly as shown above. Ensure that all of the joints
are sound.
4. Glue the blind nuts into the wing mounting plate and then
glue the sub-assembly to the former ensuring that it is
vertical and square.
To Next Page
Loading...
