78 •
••
• HOG – Version 3.20
It is recommended that a show is also saved normally. A show saved as a previous version
may not retain all features of your show.
Creating a New Show
To clear the console and start with a fresh blank show, there are three ways to proceed:
•
You can press New Show in the start up window when the console is turned on.
•
You can press New Show in the Change Show window.
•
Or you can load a blank show from a floppy disk by pressing Load Show in either the start up
window or the Change Show window.
You do not need to have a fixture library in the disk drive as the console has a built in ROM library. If you
are using custom made fixture files or wish to save the show in an older format, you will need to use a
fixture file from disk, and hence you will need to load a blank show.
To Next Page
