To Next PageTo Next Page
Need help?Do you have a question about the Jandy WaterColors LED and is the answer not in the manual?
General| Energy Efficiency | High |
|---|---|
| Type | LED Underwater Light |
| Voltage | 12V |
| Color Options | Multiple colors, color changing |
| Control | Remote or Automation System |
| Installation | Niche Mount |
| Wattage | Varies by model |
| Cord Length | Varies by model (e.g., 50 ft, 100 ft) |
| Number of Colors | 7+ |
| Number of Light Shows | Up to 5 light shows |
| Light Output | Varies by model |
| Housing Material | Stainless Steel |
| Installation Type | Niche-mounted |
| Beam Angle | Wide beam angle for broad coverage |
Risks of electrical shock, electrocution, and improper installation.
Requirements for safe light placement, depth, and guarding.
Guidance for installers and owners on manual content and product application.
Preparatory steps before installing the light fixture in new construction.
Step-by-step procedure for physically installing the light fixture.
Checks and requirements for replacing a light in an existing pool.
Guide for removing and installing a light fixture in an existing pool.
Connect lights to Jandy AquaLink RS system for control.
Connect lights to a time clock for automatic operation.
Wire lights to a manual switch for on/off control.
How to turn on the light and cycle through color modes.
Instructions for replacing the light engine for small and large models.
Exploded diagram and parts list for the large light.
Exploded diagram and parts list for the small light.
