To Next PageTo Next Page
Need help?Do you have a question about the Jandy Laminar Jet and is the answer not in the manual?
General| Brand | Jandy |
|---|---|
| Model | Laminar Jet |
| Category | Lighting Equipment |
| Language | English |
Key safety warnings regarding fire, electric shock, and injury to persons.
Specific warning about the risks of electrical shock during installation and use.
Guidance for installers and information to be provided to the owner/operator.
Details on water source filtration and pump flow rates for proper operation.
Information on plumbing connections, LED light modules, and fiber optics.
Specifies optimal positioning and orientation for the laminar jet assembly.
Step-by-step guide for installing the deck canister in-ground.
Instructions for installing the deck canister in planter boxes or above deck.
Procedures for pressure testing water lines and flushing debris.
Steps for preparing and physically installing the LED light assembly.
Details on wiring the LED lights to control systems, time clocks, or switches.
Guidance on installing the necessary low-voltage transformer for the LED lights.
Lists the necessary tools and supplies for installing the fiber optic module.
Step-by-step instructions for routing and securing the fiber optic cable.
Instructions for installing the jet assembly into the deck canister.
Guidance on setting up the jet, adjusting flow, angle, and water height.
How to turn on the lights and cycle through different color modes.
Procedure to reset the LED light color sequence to its default starting point.
Steps to adjust the LED light intensity by modifying water stream disturbance.
Procedure to clean a clogged finger screen to restore proper stream operation.
Instructions for winterizing the laminar jet in regions requiring it.
A list of all available parts for the laminar jet assembly.
A visual diagram showing the assembly of all parts.
