Janome 15000 - Advanced Stitching and Embroidery Tools; Stitch Composer Program; Linear Motion Embroidery System; Independent Bobbin Winding Motor

Stitch Composer™
The unique Stch Composer™ program allows you
to create and edit stches from you computer. 100
stches from the machine are built into the program,
or for a truly customized experience, create your own
from scratch! The program is easy to use, and
transferring stches to your machine is a snap.
Linear Motion Embroidery™
Janome pioneered the home embroidery market
with an X-Y movement in the 1990s with the Memory
Cra 8000. As the world’s largest manufacturer of
industrial desktop robots,
we implemented and
perfected this technology.
This experse now comes
back to sewing, with our
state of the art Linear
Moon Embroidery™
System. This system uses 3
linear moon guides – two
on the X axis, one on the
Y – which allows for unrivalled stability and smooth
movement, even with our giant GR hoop.
Independent Bobbin Winding Motor
Never run out of full bobbins! The Horizon Memory
Cra 15000’s independent bobbin winding motor
enables you to wind bobbins even while you are
sewing. It’s the perfect sewing mul-tasker.
Easy Threading Bobbin Case and Cover
The specially
designed
bobbin case
and cover
mean there’s
no need to pull
long thread
tails up and
through when you rst thread the machine. Slip the
bobbin thread in the cover plate guide; the built in
cung blades trim the tail to the correct length for
a super-clean start to your stching line. Aer the
inial threading, the auto-thread cuer takes care of
trimming and re-seng the tails each me.
Bobbin Winder Plate with Cutter
The new bobbin winder plate has ve cung blades.
Faster and smoother winding, easy thread cung,
and your bobbin is ready to go!
Auto Presser Foot Lift
The auto presser foot li automacally lis the
presser foot aer a thread cut – when the thread snip
buon is pressed, or aer a programmed thread cut
at the end of a row of decorave stches - allowing
you to keep your hands on your project at all mes.
It can also be set to raise at the end of any seam, with
the needle in the down posion for easy pivong. This
great feature simplies the sewing process – you have
less manual steps to save me and increase eciency.
9mm Zig Zag
That’s right – you can create
9mm wide stches on the
Horizon Memory Cra 15000!
The extra width makes all of
your decorave stches bolder,
brighter, and more disnct.
Wider, more disnct stches
allow you to ll more area with
stching, quicker - saving you
valuable me while sewing.
One Step™ Plate Converter
Using the right tools at the right me is important in
sewing. When using lightweight fabrics, or piecing
quilts, a straight stch needle plate makes all the
dierence. Our One Step™ Plate Converter allows
you to easily switch and use the perfect plate for your
project. Simply press a buon to release one plate;
then snap a new one in place – it takes only seconds,
with no screwdrivers required! The enhanced plate
allows for users to move the needle slightly on the
straight stch plate for scant ¼” seams. This system
also includes a sensor that will only allow a straight
stch to be sewn when the Straight Stch Needle
Plate is in place, so you never have to worry about
breaking a needle! Both needle plates are included as
standard accessories.