Why does the needle thread break on my Janome Memory Craft 15000?
The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is inserted incorrectly. * The thread is too heavy for the needle. * The needle thread was not set in the thread holder when embroidery sewing started.
Why is my Janome Memory Craft 15000 so noisy?
Your Janome sewing machine might be noisy because thread is jammed in the hook area, or the feed dog is packed with lint.
Why does the bobbin thread break on my Janome Sewing Machine?
The bobbin thread may break if it is not threaded properly in the bobbin holder, if lint has collected in the bobbin holder, or if the bobbin is damaged and does not turn smoothly. If the bobbin is damaged, replace it.
What causes skipped stitches on my Janome Memory Craft 15000 Sewing Machine?
Skipped stitches on your Janome sewing machine can occur if: * The needle is inserted incorrectly. * The needle is bent or blunt. * The needle and/or threads are not suitable for the fabric being sewn. * A blue needle is not being used for sewing stretch, very fine or synthetics. * The needle thread is not threaded properly. * The needle is defective (rusted, burr on needle eye or tip). * The embroidery hoop is not set properly. * The fabric is not stretched tightly enough on the embroidery hoop. * A purple needle is not being used for sewing thick fabrics, denims and across the hem.
What causes seam puckering when using my Janome Memory Craft 15000 Sewing Machine?
Seam puckering can occur if the needle tension is too tight, the needle thread or the bobbin thread is not threaded correctly, the needle is too heavy for the fabric being sewn, the stitch length is too long for the fabric, the stitch width is too wide, or the fabric is not stretched tightly enough on the embroidery hoop. If the stitch length is too long for the fabric being sewn, make stitches shorter; if the stitch width is too wide, reduce the stitch width.
Why are patterns distorted on my Janome Sewing Machine?
Patterns may be distorted if the needle thread tension is too loose, the stitch length is not suitable for the fabric being sewn, the feed balancing dial is not properly set, interfacing is not used for sewing stretch and very fine fabrics, the embroidery hoop attaching knob is loose, the embroidery hoop is hitting something around the machine, the fabric is not stretched tightly enough on the embroidery hoop, the fabric is caught or trapped when sewing embroidery, the embroidery foot is trapped by a jump thread, or the embroidery foot stumbles on a mound of embroidery threads. If the fabric is caught or trapped when sewing embroidery, stop the machine and free the fabric; if the embroidery foot is trapped by a jump thread, trim the jump thread.
What to do if layers are slipping while sewing with my Janome Sewing Machine?
If you're experiencing slipping layers when sewing with your Janome sewing machine, it may be that the dual feed foot is not being used for sewing hard to feed material. Use the dual feed foot.
Why aren't the automatic buttonhole stitches balanced on my Janome Memory Craft 15000 Sewing Machine?
If the automatic buttonhole stitches are not balanced, it may be because the stitch length is not suitable for the fabric being sewn, the feed balancing dial is not set properly, or interfacing is not being used with stretch fabric. Use an interfacing.
What does it mean if my Janome Memory Craft 15000 Sewing Machine makes a crunching sound?
A crunching sound when running the Janome sewing machine can occur if something is caught between the carriage and the arm, if the carriage is hitting something around the machine or if the power is turned on when the feed dog is lowered. If something is caught between the carriage and the arm, remove the object. If the power is turned on when the feed dog is lowered, it is initializing sound, not a defect.
Why does the visual touch screen swell on my Janome Memory Craft 15000?
The visual touch screen may swell if the machine has been exposed to high humidity and high temperature. Use and store the machine in a cool and dry area.
General| Embroidery Designs | 480 |
|---|---|
| USB Ports | 2 |
| Needle Positions | 91 |
| Needle Threader | Automatic |
| Bobbin Winder | Automatic |
| Lighting | 10 white LED lamps in 5 locations |
| Built-in Memory | Yes |
| Sewing Speed | 1000 stitches per minute |
| Screen | Color Touchscreen |
| Connectivity | Wi-Fi, USB |
| Type | Sewing and Embroidery Machine |
| Embroidery Area | 9.1" x 11.8" |
| Buttonholes | 13 (automatic) |
| Hoops Included | GR Hoop (9.1" x 11.8"), SQ23 Hoop (9.1" x 9.1"), FA10 Hoop (3.9" x 1.6") |
To Next Page
