104
w
Attaching the embroidery unit
z Turn the power switch off.
Remove the cover from the machine.
q Power switch
w Cover
NOTE:
Always attach the extension table except when using
the free-arm hoop.
EMBROIDERY MODE
Embroidery Unit
NOTE:
Be sure to provide sufficient space around the
machine to allow the hoop to move freely.
Do not place anything inside the area shown on the
left.
r
e
73 cm
(28-3/4˝)
q
x Place the embroidery unit on the back side of the
machine base, matching the small dots as shown.
e Embroidery unit
r Small dots
c Slide the embroidery unit along the machine to the
right and push the embroidery unit firmly until it fits
securely.
z
x
c
33 cm
(13˝)
To Next Page
Loading...
