Janome Memory Craft 15000 - Adjusting the Size of the Last Pattern

147
Adjusting the size of the last pattern
Iftheouteredgesofeachsectiondonotalignwitheach
other due to fabric shrinkage, adjust the pattern size of
the outer-most sections.
Measure the actual size (W: width, H: height) of blank
section to be stitched.
InserttheUSBashdrivethatcontainstheAcuFildesign
files.
H
W
Click “Adjust Last Pattern Size” and the Open dialog box
will open.
Select the design file that you have sewn and click Open.
Enter the measured size of the blank section and click
“OK”.
Save the adjusted design on the USB flash drive.
Do not overwrite the design file. Save the file under a
new name.
InserttheUSBashdriveintothemachineandsewthe
adjusted design in the last section.