Foot Control
Pressing on the foot control can vary sewing speed.
The harder you depress the foot control, the faster the
machine runs.
NOTE:
The machine runs at the maximum speed set by the
speed control slider when the foot control is fully
depressed.
NOTE:
This machine is equipped with an automatic shutdown
safety feature to prevent overheating whenever the
machine is running overloaded. Follow the safety
instructions that appear on the visual touch screen.
Controlling Sewing Speed
Speed control slider
You can limit the maximum sewing speed in both the
ordinary sewing mode and embroidery mode with the
speed control slider according to your sewing needs.
To increase the sewing speed, move the slider to the right.
To decrease the sewing speed, move the slider to the left.
The sewing speed can be changed while stitching.
Extra Wide Table
Peel off the backing paper from the rubber soles and
attach them to the bottom of the legs
q Rubber sole
w Leg
Attach the 4 legs to the table top with the setscrew.
Attach the table support to the underside of the table by
inserting the hooks into the slots.
e Setscrew
r Table support
Remove the extension table.
Place the assembled table on the machine.
Adjust the table height by turning the adjusting screws.
t Adjusting screw
q
w
r
e
t
9
To Next Page
Loading...
